SUPER FELT – FG APP Membrane is uniquely formulated pre – fabricated waterproofing membrane with Fibre Glass as centre core. SUPER FELT – FG has an excellent resistance to weather and ageing. Fibre Glass as centre core offers an economical waterproofing system. The polymer modification of bitumen with Atactic Polypropylene (APP) results in an excellent resistance to hot and cold temperature. Use of SUPERFELT-FG form san impervious, flexible waterproofing layer which can withstand normal movement of structure without snowing any deterioration and serve for a prolonged period of time.
SUPER FELT – FG is normally used in protected roofing and waterproofing applications in a single layer system and is also recommended as a base layer in multilayer system in various applications, including damp proofing. SUPER FELT – FG membranes are ideal for a wide range of waterproofing applications including residential and warehouses, RCC and AC and G. I roofs where low cost waterproofing is required.
PRODUCT PROPERTIES
SUPER FELT FG
SUPER FELT FG
SUPER FELT FG
SUPER FELT FG
PC 1108
PC 110
PC 118
PC 1120
Thickness
4 mm
3 mm
2 mm
1.5 mm
Roll Size
1 x 10mtr
1 x 10mtr
1 x 15mtr
1 x 20mtr
Weight (kg / m2)
4.8
2.8
2.6
1.9
Tensile Strenght L / T (N / 5cm)
590 / 400
540 / 450
450 / 300
300 / 200
Tear Resistance L / T (N / 5cm)
240 / 210
210 / 190
190 / 170
170 / 150
0 Softening Point R & B ( C)
135
135
135
135
Penetration (dmm)
15 to 25
15 to 25
15 to 25
15 to 25
Lap Joint Strenght L / T (N / 5cm)
>300 / 200
>300 / 200
>300 / 200
>300 / 200
Elongation at Break L / T (%)
30 / 40
30 / 40
30 / 40
30 / 40
Moisture Content (%)
<0.15
<0.15
<0.15
SUPERFELT-FG is also available as self adhesive rolls and also available with silver finish.
AREA OF APPLICATION:
SUPER FELT – FG is recommended and suited for waterproofing application on various surfaces such as concrete, corrugated, asbestos, GI sheet, timber, shell / folded plate etc. They are ideal for waterproofing of silos, grain godowns, warehouses, wagons, buses etc. and can be used as underlay before fixing shingles.
ADVANTAGES:
Low cost solution for waterproofing
High chemical resistance
Easy application and maintenance
First generation waterproofing membrane
Dimensional stability with pliability to adapt to all contours.
APPLICATION METHODOLOGY:
Methodology should be decided as per the type of structure and climatic condition.
Drainage outlets of minimum 100 mm diameter and thoroughly clean surface.
Provide PCC / cementitious coving at all vertical and horizontal junctions.
Apply a coat of SUPER PRIMER @ 0.3Ltr per sqm and allow it dry.
Supreme Industrial Bitumen is heated to correct working temperature and is spread @1.00 kg/sqm per coat on the roof.
Further SUPER FELT - FG is unrolled and applied under uniform pressure with the help of roller for removing entrapped air.
Overlap joints of 75mm I longitudinal direction and 100mm in transverse direction is provided and further sealed with hot bitumen.
Finally coat of Supreme Industrial Grade Blown Bitumen is applied @ 1.00 kg per sqm.
HEALTH AND SAFETY:
SUPERFELT-FG is inflammable and hence keep away from heat. Use goggles and hand glove during application.
Clean hands with warm soap water after application.